Hebrides Trim Paint

£14.95

This deeply individual hue boasts rugged, slate-like tones, offering a complex and deep greyish-blue shade that demands attention. It’s an excellent alternative to the typical go-to greys and surprisingly versatile, serving as a remarkable mixer in various color combinations.

Features:

  • Soft-satin sheen
  • Self-priming formula
  • High scuff resistance
  • UKCA and EN71-3 certification
  • Water based with low VOCs

Surfaces (Suitable for interior use only):

  • woodwork
  • radiators
  • furniture

Colour also available as:

  • Matte Chalk Wall Paint range
Add to CompareAdded
SKU: N/A Categories: ,

Coverage

  • A 500ml tin will provide a coat of up to 7m2. For a durable finish, a minimum of 2 coats is required, so your 500ml tin should provide full coverage for 3.5m2 on non-porous surfaces like laminate or metal.
  • Always ensure you have enough paint for your whole project. When more than 1 tin of the same colour is needed, it is good practice to ensure batch numbers are identical or to intermix batches prior to commencing painting.
  • Porous, or ‘thirsty’, surfaces like bare wood or MDF, tend to absorb paint meaning additional coats are likely to be required to achieve a durable finish. In this case, your 500ml tin will provide less than 3.5m2 of full coverage. If you apply the paint too thinly, durability may be affected.

Preparation

  • Ensure surfaces are in suitable condition for painting – clean, dry, free from wax, grease or penetrating substances and in sound condition. If previously painted, remove loose or flaking paint.
  • Surface preparation required in addition to the above – clean with Frenchic Sugar Soap, rinse and dry thoroughly. Hand-sand sufficiently to abrade the surface. Wipe off any dust, paint away!
  • Take care on opening the tin lid.
  • Stir thoroughly with a wide implement, such as a Paint Paddle, prior to each use

Application, drying and curing (hardening)

  • Apply with a good quality brush  or roller
  • To allow self-levelling, avoid overworking the paint
  • Allow a minimum of 4 hours between coats (even if the paint feels touch dry)
  • Curing (hardening) time is up to 3 weeks in normal conditions. Treat gently until curing is complete

Clean up and storage

  • Reseal tin after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water.
  • Do not store where the tin could be subjected to damp, frost, freezing or high temperatures.

Advice for choosing colours

We make every effort to match our online colour swatches to the paint but colours can vary depending on a number of factors, including screen settings. This means that we cannot guarantee the paint will exactly match what you see on screen.

Size

500ml